气相色谱-质谱法检测益智药材中16种多环芳烃

建立了气相色谱-质谱联用技术同时测定益智药材中16种多环芳烃(PAHs)的分析方法。最佳萃取条件为：取样品2.0 g,加入同位素内标后用无水乙醇、水混合溶解,以10 mL正己烷提取;提取液先过Florisil柱固相萃取,经氢氧化钾-乙醇溶液皂化,多环芳烃分子印迹柱固相萃取后,以5 mL二氯甲烷-正己烷(1∶1,体积比)进行洗脱;采用DB-EUPAH毛细管色谱柱进行分离,内标标准曲线法定量测定。在此条件下,16种多环芳烃的线性范围为1.0~200.0 μg/L(r2 ≥ 0.992 5);检出限(S/N=3)为0.3~1.0 μg/kg;在不同浓度(1、3、10 μg/kg)基质加标条件下,苯并［c］芴(BcFL)的加标回收率为65.4%~72.8%,日内相对标准偏差(RSD,n=6)为6.0%~7.4%,日间RSD(n=6)为8.5%;其他15种多环芳烃的加标回收率为89.3%~116%,日内RSD(n=6)为0.10%~6.1%,日间RSD(n=6)为1.2%~7.5%。该方法的前处理净化效果好、灵敏度高、准确度高,适用于益智药材中16种多环芳烃的定量检测。     

固相萃取/液相色谱-串联质谱法测定食品中二甲基黄

建立了液相色谱-串联质谱(LC-MS/MS)测定食品中二甲基黄(DMY)的分析方法。样品经乙酸乙酯提取,二甲基黄专用固相萃取小柱(ProElut DMY SPE)净化,XDB-C18色谱柱(50 mm×4.6 mm,1.8μm)分离,并以5mmol/L乙酸铵水溶液(含0.1%(v/v)甲酸)-乙腈(含0.1%(v/v)甲酸)为流动相,梯度洗脱,电喷雾正离子模式(ESI~+)电离,多反应监测模式(MRM)检测,内标法定量。结果表明,DMY在0~50μg/L范围内线性关系良好,相关系数(r~2)均大于0.999。方法的检出限(LOD,S/N3)和定量限(LOQ,S/N10)分别为2μg/kg和10μg/kg。不同食品基质中,DMY在10、20和100μg/kg的添加水平下的平均加标回收率为93.3%~98.9%,相对标准偏差为1.6%~3.9%(n=6)。该方法有效补偿了液相色谱-串联质谱检测过程中的离子化抑制效应,灵敏度和准确度高,适用于腐乳、辣椒酱、禽蛋、豆干、糖果和火腿中DMY的测定。     

超高效液相色谱-串联质谱法检测花生中36种农药及其代谢物残留

建立了花生中36种农药及其代谢物残留的超高效液相色谱-串联质谱(UHPLC-MS/MS)快速检测技术。采用乙腈提取,增强型脂质去除净化剂(EMR-Lipid)净化,正离子多反应监测(MRM)模式测定。结果表明,所有农药的线性相关系数均大于0.994,在0.005,0.01,0.10 mg/kg 3个加标水平下,36种农药的平均回收率为70.4%~119%,相对标准偏差(RSDs)为1.3%~19.4%,方法的定量下限为0.002 5~0.05 mg/kg。该方法简便、快速,灵敏度高、净化效果好,适用于花生中农药多残留的快速检测分析。     

Synthesis,characterization, and hydrolytic degradation of polylactide/poly(ϵ-caprolactone)/nano-silica composites

Poly(lactic acid) (PLA)/poly(?-caprolactone) (PCL)/nano-silica composite degradable films were prepared by a solvent casting method. SEM results showed that the nano-silica particles were dispersed uniformly in the PLA/PCL matrix. TGA results indicated that the thermal decomposition temperature rose with the increase of nano-silica content. The tensile strength of the composites was enhanced with the increase of nano-silica content up to 2%. The tensile strength increased with the silica content and reached its maximum (22.51 Mpa). The improvement in the water uptake ratio in the PLA/PCL/silica nanocomposites may be attributable to the presence of silica nanoparticles in the PLA/PCL matrix. After 15 weeks total processing time for the solution of alkaline and phosphate buffer, the performances of 16.23% and 3.65% for degradation.     

液相色谱-串联质谱法测定蜂产品中吡虫啉及其3种代谢物

建立了蜂蜜和蜂花粉中吡虫啉及其代谢物吡虫啉烯烃、吡虫啉脲、6-氯烟酸的液相色谱-串联质谱(LC-MS/MS)检测方法.在QuEChERS方法基础上,针对目标物化学性质和样品杂质情况,对提取溶液的pH值、提取次数、净化材料等参数进行了优化.最终以5％甲酸-乙腈溶液提取两次,无水MgSO4、NaCl盐析分层,提取液经增强型脂类去除材料(EMR)净化,以LC-MS/MS进行测定,基质外标法进行定量分析.结果表明,蜂蜜和蜂花粉中吡虫啉、吡虫啉烯烃、吡虫啉脲、6-氯烟酸的平均加标回收率为86.0％～111.5％, 相对标准偏差在1.7％～9.6％之间, 检出限分别为0.20, 3.50, 0.40和14.00 μg/kg,定量限分别为0.60, 11.64, 1.20和45.00 μg/kg.本方法分析速度快、灵敏度高、重现性好,适用于蜂蜜和蜂花粉中吡虫啉及其3种代谢物的快速测定.     

Determination of polarity parameters for liquid crystals using solvatochromic method in anisotropic and isotropic phases

The use of liquid crystals (LCs) as anisotropic solvents is desired for various potential applications and usually for other organic and inorganic compounds. In this work, solvent polarity parameters are obtained using a spectroscopic method for four LCs with a range of high and low dielectric anisotropy (?ε). Solvatochromic polarity parameters for these LCs were defined via Kamlet–Abboud–Taft polarity functions characterizing different temperatures and phases, isotropic and anisotropic, and using the Reichardt’s dye and 2,6-diphenyl-4-(2,4,6-triphenyl-1-pyridinio) phenolate standard probe. The investigated polarity parameters reveal the effects of LC media on the photo-physical behaviour of solute molecules in isotropic and anisotropic media. Subsequently, a new LC polarity parameter (Z_o) is introduced as an overall matrix anisotropy polarity parameter to characterize variation between isotropic and anisotropic phases. The values of Z_o are sorted from higher to lower dielectric anisotropies (?ε).     

矩阵代数收敛至球面与非交换度量几何

介绍了Rieffel定义的紧致量子度量空间与量子Gromov-Hausdorff距离和近来Latrémolière定义的量子Gromov-Hausdorff邻距,分别讨论了矩阵代数如何在这两种量子距离下收敛至球面.     

A fast discontinuous finite element discretization for the space‐time fractional diffusion‐wave equation

In this article, we study fast discontinuous Galerkin finite element methods to solve a space‐time fractional diffusion‐wave equation. We introduce a piecewise‐constant discontinuous finite element method for solving this problem and derive optimal error estimates. Importantly, a fast solution technique to accelerate Toeplitz matrix‐vector multiplications which arise from discontinuous Galerkin finite element discretization is developed. This fast solution technique is based on fast Fourier transform and it depends on the special structure of coefficient matrices. In each temporal step, it helps to reduce the computational work from required by the traditional methods to log , where is the size of the coefficient matrices (number of spatial grid points). Moreover, the applicability and accuracy of the method are verified by numerical experiments including both continuous and discontinuous examples to support our theoretical analysis.© 2017 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 33: 2043–2061, 2017     

椭圆PDE-约束优化问题的一个预条件子

针对由Galerkin有限元离散椭圆PDE-约束优化问题产生的具有特殊结构的3×3块线性鞍点系统,提出了一个预条件子并给出了预处理矩阵特征值及特征向量的具体表达形式.数值结果表明了该预条件子能够有效地加速Krylov子空间方法的收敛速率,同时也验证了理论结果.